Short: V2.00 Bitmap->Vector tracer Main archive Author: Ronny.Schuetz@gmx.de (Ronny Schuetz) Uploader: Ronny Schuetz gmx de (Ronny Schuetz) Type: gfx/conv Version: 2.00 Replaces: gfx/conv/XTrace_Main.* Requires: OS 3.0 Architecture: m68k-amigaos ******************************************************************************** * * * Main archive only !!!!!!! Read the 'Attention' chapter please !!!!!!!! * * * * Dies sind nur das Hauptarchiv. !!!! Lesen Sie bitte den * * Abschnitt 'Achtung' !!!! * * * ******************************************************************************** ================================================================================ German text below. / Deutscher Text unten. ================================================================================ -------------------------------------------------------------------------------- Attention !!! -------------------------------------------------------------------------------- For installation you need three archives from Aminet:gfx/conv. Some archives (Doc and CPU) exists in more than one version. Please choose the required documentation language and the required CPU-Version. If you don't known, which CPU/FPU works in your Amiga, download all CPU files or only the files you think that are the right ones. You can also download more than one documentation archive or CPU archive, the install script lets you choose the language and the CPU version to install. If you want to change an installed XTrace documentation into another language, you can also download only a documenation archive and install the documentation with the install script located in the Documentation/ drawer. The main archive : XTrace_Main.lha The doc archive : XTrace_???Doc.lha - ??? = Eng -> English documentation - ??? = Ger -> German documentation - ??? = Fre -> French documentation The CPU archive : XTrace_#?.lha - #? = 000 -> MC68000 version - #? = 020 -> MC68020 version - #? = 020882 -> MC68020/M68882 version - #? = 030 -> MC68030 version - #? = 030882 -> MC68030/M68882 version - #? = 040 -> MC68040 version - #? = 060 -> MC68060 version Extract all downloaded XTrace archives into the _same_ directory and start the installer script. It is possible, that some documentation archives will be released much later than the XTrace main program, because the translation of these files is still under progress. Please read the history chapter carefully, because some important changes was made. -------------------------------------------------------------------------------- What is XTrace ? -------------------------------------------------------------------------------- XTrace is a tracer to convert bitmap pictures (like IFF ILBM files) to vector pictures (like AI, EPS, FIG, IFF DR2D or DXF files). It offers many operators to process bitmap and vector pictures and also supports bezier curves, XPK, clipboards, CyberGraphX/Picasso96 etc. As a very special feature, XTrace is able to save traced pictures as 3-dimensional logo for Michiel den Outer's "Navigator Titler" (Video Titler) and as 3-dimensional DXF files (for use with raytracers). It can also load and trace AMIGA fonts and save these as 3-dimensional fonts for the "Navigator Titler". *Please* read the documentation in every case carefully, otherwise, you can't take the full advantage of XTrace !! There's also a FAQ chapter with some questions/answers you'll probably have. -------------------------------------------------------------------------------- Requirements -------------------------------------------------------------------------------- XTrace requires at least AmigaDOS 3.0, at least 5 Mb RAM and a fast processor to work efficient, but it should run with 2 Mb RAM and a MC68000. It requires approximately 2 Mb of hard disk space for full installation. -------------------------------------------------------------------------------- Installation -------------------------------------------------------------------------------- Installation is easy, just click on the installation icon and XTrace will be installed. The installation is safe, there's no risk of overwriting any files and you can later uninstall easily by deleting the XTrace-Drawer. This will completely remove XTrace from your system. If you abort the installation, files that were installed will be deleted. All files except some libraries were installed into a single directory. I suggest you install XTrace in expert user mode. You should really use the Installer script and not try to install XTrace manually. If you don't have the standard Amiga Installer utility, you can download it from any Aminet site, the file is: Aminet:util/misc/Installer_43_3.lha This file can be found also on the Aminet CDs #13 - #16. Please note that the XTrace installation script requires this version of the installer. It is possible, that it will not or not correctly work with older versions ! I can't include it, because I don't know if Amiga International, Inc. allow that. -------------------------------------------------------------------------------- Distribution -------------------------------------------------------------------------------- This version of XTrace is unregistered, every picture will be marked with "DEMO". So register please .... :-) For further information read the guide or the about text in the program. -------------------------------------------------------------------------------- History -------------------------------------------------------------------------------- Changes since XTrace V1.20 : ADD: "Display traces" option for Trace (-> André Rothe) ADD: FIG exporter (-> Volker Schmidt) IMP: Supress noise slightly improved IMP: Apply Digital Filter Sequence slightly improved ADD: Full CyberGraphX/Picasso96 support (if you choose a screen deeper than 8 bit for the XTrace screen, the pictures will be displayed colored) CHG: Monitor settings CHG: Thinning can now handle also other Color-Types than only 'B/W'. (-> Volker Schmidt) IMP: Permanent Windows settings ADD: Log window incl. some options ADD: Own routines for displaying filled polygons as replacement for the Area() commands. No chip memory more needed. ADD: Lens und Hand tool now also available for vector pictures. REM: Worldmap ADD: Operator Remove pen IMP: Slope (again ...) ADD: Adobe Illustrator® exporter IMP: DXF 2D exporter capabilities slightly improved ADD: HP-GL exporter IMP: Display histograms can now display seperate histograms for red, green and blue parts, as well as brightness and saturation parts and the orginal histogram. IMP: Stretch histogram and Equalize histogram now available for all Color-Types. IMP: EPS exporter ADD: Adaptive histogram equalization ADD: Apply Digital Filter Sequence works internally always with 8 (for Grayscales and B/W pictures) or 24 (for palette pictures) bit now. ADD: Base-shapes and new divider/bias calculation for filters (Edit filter) CHG: Fileformat of filters, filtersequences, colorcurves and settings changed to a more portable text format. Please convert your own filters, filter- sequences and colorcurves with the enclosed program "FileFormatConverter". The settings are not convertable, please set your preferences new and save them. ADD: A remark for every filter, filtersequence and colorcurve can now be stored (for example the effect of the filter). ADD: Operator Edge enhancement IMP: Operator Edge detection IMP: Picture window title IMP: Loaded pictures list ADD: Close bitmap part and Close vector part ADD: Operator Coalesce colors ADD: Filtersets for digital filters (Apply Digital Filter Sequence, Edit filter) NEW: Remove isolated pixels operator For older changes read the history chapter in the guide please. ================================================================================ ================================================================================ -------------------------------------------------------------------------------- Achtung !!! -------------------------------------------------------------------------------- Sie benötigen für die Installation 3 Archive aus Aminet:gfx/conv. Einige Archive (Doc und CPU) existieren in mehr als einer Version. Bitte wählen Sie die benötigte Sprache und CPU-Version. Wenn Sie nicht wissen, welche CPU/FPU in Ihrem Amiga arbeitet, downloaden Sie am besten alle CPU-Archive oder nur die, von denen Sie denken es sind die richtigen. Sie können auch mehrere Dokumentations-Archive oder CPU-Archive downloaden, das Install Script lässt Sie die Sprache und CPU wählen. Falls Sie eine bereits installierte XTrace V1.20 Dokumentation in eine andere Sprache ändern wollen können Sie auch nur das entsprechende Dokumentations- Archiv downloaden und die Dokumentation mit dem Install-Script welches im Verzeichnis Documentation/ liegt installieren. Das Haupt-Archiv : XTrace_Main.lha Das Doc-Archiv : XTrace_???Doc.lha - ??? = Eng -> Englische Dokumentation - ??? = Ger -> Deutsche Dokumentation - ??? = Fre -> Französische Dokumentation Das CPU-Archiv : XTrace_#?.lha - #? = 000 -> MC68000 Version - #? = 020 -> MC68020 Version - #? = 020882 -> MC68020/M68882 Version - #? = 030 -> MC68030 Version - #? = 030882 -> MC68030/M68882 Version - #? = 040 -> MC68040 Version - #? = 060 -> MC68060 version Extrahieren Sie alle downgeloadeten XTrace-Archive in _dasselbe_ Verzeichnis und starten Sie das Install-Script. Es ist möglich, daß einige Dokumentations-Archive später als das XTrace-Hauptprogramm freigegeben werden, da die Übersetzung dieser Dateien noch in Arbeit ist. Bitte lesen Sie den Geschichts-Abschnitt aufmerksam da einige wichtige Änderungen gemacht wurden. -------------------------------------------------------------------------------- Was ist XTrace ? -------------------------------------------------------------------------------- XTrace ist ein Tracer um Bitmap-Bilder (wie IFF ILBM Dateien) in Vektor-Bilder (wie AI, EPS, FIG, IFF DR2D oder DXF-Dateien) umzuwandeln. Es stellt sehr viele Operatoren zur Verfügung um Bitmap.- sowie Vektor-Bilder zu bearbeiten und unterstützt Clipboards, Bezier-Kurven, XPK, CyberGraphX/Picasso96 etc. Als sehr spezielles Feature kann XTrace getracte Bilder als 3-dimensionale Logos für Michiel den Outer's "Navigator Titler" (Video Titler) und als 3-dimensionale DXF-Files (für die Nutzung mit Raytracern) speichern. Außerdem ist es fähig, AMIGA-Fonts zu laden, zu tracen und als 3D-Font für den "Navigator Titler" zu speichern. *Bitte* lesen Sie die Dokumentation in jedem Fall aufmerksam, ansonsten werden Sie nicht die volle Funktionalität von XTrace ausnutzen können !! Dort existiert auch ein FAQ Kapitel, welches einige Fragen/Antworten enthält, die Sie möglicherweise haben werden. -------------------------------------------------------------------------------- Benötigte Ausstattung -------------------------------------------------------------------------------- XTrace benötigt zumindest AmigaDOS 3.0, mindestens 5 Mb RAM und einen schnellen Prozessor um effizient zu arbeiten. Es sollte aber bereits mit 2 Mb RAM und einem MC68000 laufen. Es benötigt ungefähr 2 Mb Festplattenspeicherplatz für eine volle Installation. -------------------------------------------------------------------------------- Installation -------------------------------------------------------------------------------- Die Installation ist einfach, nur das Installations-Icon anclicken und XTrace wird installiert. Sie ist sicher, es besteht kein Risiko andere Files zu überschreiben und XTrace kann einfach durch das löschen des XTrace-Verzeichnisses komplett von Ihrem System entfernt werden. Wenn Sie die Installation abbrechen, werden ebenfalls alle bereits installierten Dateien gelöscht. Alle Dateien außer ein paar Libraries werden in einem Verzeichnis installiert. Ich empfehle XTrace im Experten-Modus zu installieren. Sie sollten das Installer-Script nutzen und nicht versuchen XTrace manuell zu installieren. Falls Sie nicht das Standard-Amiga-Installer-Programm haben, können Sie es von jeder Aminet-Site downloaden, die Datei ist : Aminet:util/misc/Installer_43_3.lha Dieses File ist u.a. auch auf den Aminet-CDs #13 - #16 zu finden. Bitte beachten Sie, daß das XTrace Installskript diese Version des Installers benötigt. Es ist möglich, daß das Skript mit älteren Versionen nicht oder nicht richtig funktioniert ! Ich kann den Installer nicht beilegen, da ich nicht weiß, ob Amiga International, Inc. dies erlaubt. -------------------------------------------------------------------------------- Vertrieb -------------------------------------------------------------------------------- Diese Version von XTrace ist unregistriert, jedes Bild wird mit "DEMO" markiert. Also registrieren Sie sich bitte ... :-) Für weiterführende Informationen lesen Sie bitte das Guide oder den About-Text im Programm. -------------------------------------------------------------------------------- Geschichte -------------------------------------------------------------------------------- Veränderungen seit XTrace V1.20 : ADD: "Display traces" Option für Trace (-> André Rothe) ADD: FIG-Exporter (-> Volker Schmidt) IMP: Supress noise etwas verbessert IMP: Apply Digital Filter Sequence etwas verbessert ADD: Volle CyberGraphX/Picasso96 Unterstützung (wenn Sie einen Screen mit einer Tiefe > 8bit für den XTrace-Screen wählen werden die Bilder farbig dar- gestellt). CHG: Monitor settings CHG: Thinning funktioniert jetzt mit jedem Color-Typ als nur mit 'B/W'. (-> Volker Schmidt) IMP: Permanent Windows Einstellungen ADD: Log window inkl. div. Optionen ADD: Eigene Routinen für die Darstellung gefüllter Polygone, anstatt der Area()-Befehle. Dafür ist nun kein ChipMem mehr nötig. ADD: Lupen.- und Hand-Tool nun auch für Vectorpictures verwendbar. REM: Worldmap ADD: Operator Remove pen IMP: Slope (wieder einmal ...) ADD: Adobe Illustrator®-Exporter IMP: DXF 2D Exporter etwas verbessert. ADD: HP-GL-Exporter IMP: Display histograms kann nun separate Histogramme für die Rot-, Grün- und Blauanteile, sowie Helligkeits- und Sättigungs- anteile und das orginale Histogramm anzeigen. IMP: Stretch histogram und Equalize histogram nun für alle Color-Types verfügbar. IMP: EPS Exporter ADD: Adaptive histogram equalization ADD: Apply Digital Filter Sequence arbeitet nun intern stets mit 8 (für Graustufen.- und B/W-Bilder) oder 24 (für Paletten-Bilder) bit. ADD: Filterkernformen und neue Berechnungsart für Divider/Bias für Filter (Edit filter) CHG: Fileformat der Filter, Filtersequenzen, Colorcurves und Settings in ein portableres Textformat geändert. Bitte konvertieren Sie Ihre eigenen Filter, Filtersequenzen und Colorcurves mit dem beiliegenden Programm "FileFormatConverter". Die Settings sind leider nicht konvert- ierbar, bitte stellen Sie sie neu nach Ihren Bedürfnissen ein und speichern Sie sie ab. ADD: Für jeden Filter, jede FilterSequenz und Colorcurve können Anmerkungen, z.B. über die Auswirkungen des Filters gespeichert werden. ADD: Operator Edge enhancement IMP: Operator Edge detection IMP: Picture window title IMP: Loaded pictures list ADD: Close bitmap part und Close vector part ADD: Operator Coalesce colors ADD: Filtersets für digitale Filter (Apply Digital Filter Sequence, Edit filter) ADD: Remove isolated pixels Operator Für ältere Veränderungen lesen Sie bitte den Geschichtsabschnitt im Guide.