Short: CLI/GUI SMPTE Ctrl program for Studio 16 Author: kenny@bgnett.no Uploader: kenny bgnett no Type: mus/misc Version: 1.11 FREE VERSION Requires: Studio 16 v3.x Architecture: m68k-amigaos mailto:kenny@bgnett.no Copyright (C) 1998,1999 by Digital Surface/Kenneth "Kenny" Nilsen. All rights reserved. THIS SOFTWARE IS FREEWARE. - What is SMPTECTRL (SMPTE Control) ? This program allow you to control the SMPTE sinks of Studio 16 from the CLI command line or by a GUI. You can control sinks like the Internal source or the "SMPTE Output" sink source, the B&P sink and so on. You can PLAY, STOP, FastForward and Rewind the sink. You can even set a SMPTE code at any time. You can also select source or use default (current) sink source. The GUI contains four buttons for Play, Stop, FF, REW and an input gadget to set a new SMPTE time. It also contains a line which shows current SMPTE time and buttons for storing and recalling TC memory. The GUI will pop up on the Workbench screen or any other public screen. - What does it require ? A SMPTE source which could be Studio 16 or the "SMPTE Output" stand-alone module. It require the Studio 16 v3.x in order to work. For gui it requires dfunc.library v38 (included). It requires OS 2.04 or better to work as well. Examples of use (CLI examples): 1> SMPTECTRL PLAY Will start play the current sink. 1> SMPTECTRL PLAY SetSource "SMPTE Output" Will force the "SMPTE Output" module to start play if it's available 1> SMPTECTRL STOP Will stop current sink source. 1> SMPTECTRL SetSMPTE "00:01:02:12" SetSource "SMPTE Output" Will set the "SMPTE Output" source to time 00:01:02:12. 1> SMPTECTRL GUI Will popup the GUI interface of the program. 1> SMPTECTRL GUI SetSource "Internal" Will popup the GUI and use the "Internal" SMPTE sink source. From WB you just double click its icon an it will pop up its GUI and use current SMPTE sink as source or the one specified in the tooltypes. You can have several project icons to start SmpteCtrl from WB. -- Disabled features in this demoversion: - Play trigger comand from CLI - Tooltypes reading - Saving and loading of timecode memory